Do You Find a Car Window Regulator Replacement For Renault

Do you want to feel the soft breeze on your face while driving? Roll your windows up and down with a fully functioning window regulator. Window regulators allow you to drive with open or closed windows. Available in both manual and electric types, this component is located inside the door panel. It transforms and up and down motion.



Even though the Renault is a sturdy and reliable car, it is not immune to problems caused by wear and accident damage. Renault window problems are not uncommon on some Renault models. The likely cause is chafed or damaged wiring. An individual can check the wires where they pass from the car body into the door; this is a common place for damage to occur. If it fails you might need to replace your window regulator.

Before you start shopping for a replacement, find out the specifications of your regulator. Make sure that the one you purchase meets these specifications. It is also advisable to make sure that the new regulator comes with a warranty that guarantees it is crafted using high-grade materials and processes. Here is a recommendation which is highly satisfied among our customers.

SA500 Window Regulator Replacement For Renault

• Application

For window regulator module
For TEMIC & Magneti Marelli replacement.

• Make / Models

Renault Megane II 2002-2008,
Renault Scenic II 2003-2009,
Renault Clio III 2005- 2013

• Features
• One touch total close , Car lock track and window total close automatically
• Anti-pinch safety model, Easy to set and initial.
• Redesigned with earth leakage protection.

SA500 is very cost-effective, you can trust us and rest assured to purchase. Every unit is under two years full European Warranty.

Our customers choose us because we provide the most suitable auto electronic solutions at the most affordable price. Over the last decade, our approach to business has helped transform us from a small company to a leading global supplier. This didn’t happen overnight, and it didn’t happen without total commitment to our mission—helping our customers fix their car issues efficiently while reducing their repair costs, finally to meet customer’s needs.

SACER Ltd is engaged in the manufacture and distribution of a wide variety of auto electronic control module products. With over 10 years’ ongoing development, SACER has grown into a major company with over 100 employees. The long immersion in auto aftermarket accumulates our experience in providing quality products for our valued clients with full confidence and appreciation.  Reach us at https://www.sacer.com.cn

More Info About Sacer, Please visit:
https://plus.google.com/+Sacer-shop
https://twitter.com/SacerLtd
https://www.facebook.com/Sacer.de
https://vk.com/sacerltd

SA500 Car Window Regulator Replacement For Renault

The mechanism that moves the window up and down is called the window regulator. In cars with power windows, the window regulator is powered by an electric motor, called the window motor. In some cars, the window motor comes with the window regulator as one unit; in others, the window motor can be replaced separately. There are two basic types of window regulators: One is the gear-drive type, the other is the cable type.

A broken or tangled window regulator cable can cause the window to jam or fall down inside the door. Other problems can be related with dead motor or broken inner gear. When the window switch is operated down, the window can separate from the window regulator. If this happens, the window regulator might need to be replaced.


Symptoms of a bad window regulator
- the window falls down inside the door
- abnormal noise when a window is moving up or down
- the window rises slow, jams or doesn't close fully
- the window slides up or down crooked
- the window doesn't move at all while all other windows work
- when switch is on, the window motor runs but the window doesn't move.

A window regulator doesn't need any maintenance or adjustment. If it fails, the failed part or the whole unit must be replaced. Replacing the window regulator is not very expensive and aftermarket parts are often available. Here we highly recommend a SACER window regulator replacement to you.

SA500 Window Regulator Replacement For Renault

• Application

For window regulator module For TEMIC & Magneti Marelli replacement.

• Make / Models

Renault Megane II 2002-2008,
Renault Scenic II 2003-2009,
Renault Clio III 2005- 2013

• Features
• One touch total close , Car lock track and window total close automatically
• Anti-pinch safety model, Easy to set and initial.
• Redesigned with earth leakage protection.

SACER products is the most cost-effective choice, you can trust us and rest assured to purchase. Every unit is under two years full European Warranty.

Established in 2007, SACER Ltd has gradually grown into a robust company specialized in auto electronic control modules. With excellent staff, and the new E.R.P. system, SACER continues to provide high quality products in auto aftermarket. Another one of our strengths is our flexibility, which allows us to constantly innovate to meet customers' particular needs. Our goal is to comply with your demands and exceed your expectations to make the most suitable products at the most affordable price. Learn more, https://www.sacer.com.cn

More Info About Sacer, Please visit:
https://plus.google.com/+Sacer-shop
https://twitter.com/SacerLtd
https://www.facebook.com/Sacer.de
https://vk.com/sacerltd

SA1013 LCD Screen For Seat / Ibiza / cordoba

The most common instrument cluster problem seen on the car is faulty LCD screen. This is usually the first gauge problem the vehicle owner sees and is experienced as a dark, dim or appears to be missing pixels. Common LCD screen pixel problems mays have the following symptoms: dark dot defects, bright dot defects, partial sub-pixel defect, tape automated bonding (TAB) faults, cold start, stuck sub-pixels.

Occasionally the needle will reset itself temporarily after the ignition switch has been turned on and off a few times but soon returns to its erratic behavior. In some cases the needle will “peg out” to the fully counter clock wise or clock wise position.  In some cases the needle will move smoothly but will be reading noticeably higher or lower than normal at all points.  This problem typically starts with just one gauge but over time all the analog gauges will start displaying the same symptoms. Ultimately all gauges will fail if not repaired. Here we have a recommendation for you to replace the faulty screen.

SA1013 LCD Screen With Soldering Pins is highly recommended by our customers, we hope you can have such an opportunity to know more about  this item. And don’t miss it.

• Application: For Radio & ACC Display Model 1
• Car make / models: Seat / Ibiza / cordoba (1999-2002)
• Installation: need to solder on PCB. Soldering skills required.
• Warranty: two years full European warranty.

SA1013 LCD Screen is a perfect fit, it has super good contrast and it is very bright and nice. Very superior visual effect and excellent quality.  Price is unbeatable for it is now on the 20% off sale, buy more, save more. Well worth the money. It’s 100% brand new product and tested prior to leaving the factory.  It is absolutely an optima LCD screen replacement that works just like the original one. Actually a great buy!!

SACER Ltd was established in 2007, mainly manufacture and sell automotive electronic control module products to foreign countries. The main distribution of the products have LCD screen for instrument cluster or dashboard, stepper motors and LED bulbs for gauge panel. Turbo electric actuator, window regulator, solenoid valve and some auto electronic accessories. As well as a variety of automotive diagnostic equipment. We always maintain a good relationship with employees, partners and customers, expand business, and strive to achieve win-win situation for all sides. Welcome to purchase with us, https://www.sacer-shop.com 

More Info About Sacer, Please visit:
https://plus.google.com/+Sacer-shop
https://twitter.com/SacerLtd
https://www.facebook.com/Sacer.de
https://vk.com/sacerltd

SA9010 LCD Ribbon For Peugeot 406 Info Display

The fault of the LCD was that it only displayed a couple lines of output on the LCD. The symptoms are caused by poor location of the LCD ribbon in manufacture and also the poor position of the whole module in the vehicle which exposes it to heat and is subject to vibration within the vehicle. This causes the ribbon to fail eventually and is a known common fault.

The ribbon in the display actually controls the Rows of the LCD matrix and the Columns were handled by a rubber standoff connection on the longest side of the LCD. There were no problems with the rubberized connection.

The removal of the Display LCD ribbon is a delicate process as you do not want to tear what is a good ribbon or damage the carbon printed lines. Also the PCB must be respected to avoid introducing other faults and the the re-attachment may need an extra pair of hands.



SA9010 LCD Ribbon For Peugeot 406 info display, It is a high quality ribbon cable for LCD display pixel repair. It will work to repair problems where the LCD is dark, dim or appears to be missing pixels.  Heat seal to connect LCD and PCB, Install tools required when you install it. Electronic handling and proper heat seal techniques will be necessary. 100% brand new product and tested prior to leaving the factory. Very favorable price for you to save money when purchase with SACER.

SACER Ltd has over 10 years of industrial experience. We are one of the leading manufacturers in the automotive aftermarket industry worldwide and specialize in automobile electronic control module replacement items. Our main products include LCD screen for instrument cluster or dashboard, stepper motors and LED bulbs for gauge panel. Turbo electric actuator, window regulator, solenoid valve, etc. For years SACER has provide aftermarket with high quality products and excellent customer service. Welcome to purchase with us at https://www.sacer-shop.com

More Info About Sacer, Please visit:
https://plus.google.com/+Sacer-shop
https://twitter.com/SacerLtd
https://www.facebook.com/Sacer.de
https://vk.com/sacerltd

SA1048 Stepper Motor For Opel Micro Switec

The original stepper motors installed from the factory had an internal material/design flaw that caused short service life and have since been redesigned several times to increase lifespan and reduce noise.

Stepper motors are soldered into place directly onto the circuit board.  Replacement requires de-soldering of the faulty stepper motors for removal and soldering in of the new X27.168 replacement steppers.  Experience in electronics de-soldering and soldering is highly suggested if you attempt this repair as damage to the circuit board is common with at home repairs.

SA1048 Stepper Motor For Opel Micro Switec Instrument Cluster or Dashboard. This replacement will work to repair car stepper motor problems such as: sticky needle movement, jumpy readings, dead gauges, gauges that ratchet up or down, gauges pegged out to the left or right of the dial and more.

Product specifications as below:

• For Opel Micro Switec instrument cluster or dashboard use.
• Metal shaft, Soldering needed.
• 168 is fully replaceable updated version for X25.168.
• 100% Brand New product and tested prior to leaving the factory.

SA1048 Stepper Motor is a highly recommended product. It has maximum reliability and safe, quiet operation with very high efficiency, high position accuracy and a robust gear system. And we can offer the most favorable price for you. Definitely it is quite the most cost-effective alternative option that you can’t miss it.
For over 10 years’ ongoing development, SACER has grown into an outstanding supplier of auto electronic control module components products and solutions. Including LCD display, dashboard motors, turbo electronic actuators and window regulators and etc. Products of SACER is designed for the maximum in reliability, robustness and fine quality. Visit us now and find out what you’re looking for. https://www.sacer-shop.com/

More Info About Sacer, Please visit:
https://plus.google.com/+Sacer-shop
https://twitter.com/SacerLtd
https://www.facebook.com/Sacer.de
https://vk.com/sacerltd

TFT Screen For Citroen C5 Navigation system Display

The name TFT comes from Thin Film Transistor, which refers to the control layer behind the screen that actively controls the individual LCD pixels. Because an LCD display does not actually produce light, despite popular belief, most screens use a backlight to illuminate the image produced. Finally, the power supply provides and distributes the electrical current to drive the panel and backlight.

An automotive navigation system is part of the automobile controls or a third party add-on used to find direction in an automobile. It typically uses a satellite navigation device to get its position data which is then correlated to a position on a road.

When a TFT screen goes wrong, it is no doubt that you need to repair or  replace it soon. Before attempting to repair anything, it is important to understand what it does and how it works. A standard TFT LCD module has three main components inside the casing: the panel itself, a backlight, and a power supply. Any or all of these can fail, rendering the screen unusable.

Here is a great recommendation to replace your faulty TFT screen：   

SA1223 TFT Screen For Citroen C5 Navigation system

You could never find out something more cost-effective than this in anywhere else. It is now on 20% sale, quite unmissable because of the superior quality as well as the most unbeatable price.

Product details as below:

• Size: 7 inch chromatic TFT screen.
• For navigation system of Citroen C5 (2009-2010).
• Important part No. LB070WV1TD4.  Same as OE.
• Plug-in type, super easy to install.
• 100% Brand New product and tested prior to leaving the factory.

Sacer Ltd is an excellent manufacturer of auto electronic control modules in aftermarket. We specialized in customized solutions and products which are redesigned so that quality improved to meet the customers’ demand on car parts replacements. Including LCD displays, motors, window regulators and turbo actuators, etc.  Reach us now, https://www.sacer-shop.com

More Info About Sacer, Please visit:
https://plus.google.com/+Sacer-shop
https://twitter.com/SacerLtd
https://www.facebook.com/Sacer.de
https://vk.com/sacerltd

LCD Screen For Peugeot 407 Instrument Cluster / Dashboard

It's known to all that certain Peugeot and other models had pretty high failure rates in the LCD screens used in their instrument clusters for quite a few years. Who better to fix this problem with YOUR ailing cluster than the gauge repair and restoration experts at SACER?

There are many situations that could arise due to faulty Car LCD screen. A faulty speedometer reading could result in a speeding ticket, which in turn could lead to paying thousands of dollars in higher insurance premiums. A faulty fuel gauge reading could result in you or your family being stranded, in any number of unsafe locations, or in hazardous weather conditions. In a word, this LCD screen in your car quite matters a lot in your car, when it goes wrong, you’d better have it repaired or replaced right away.

Here is a LCD replacement recommendation for your Peugeot 407:
 
SA1004-2 LCD Screen With FPC.
It is the improved version of SA1004

• For instrument cluster / dashboard
• For Peugeot 407 (2006)
• For Peugeot 407 Petrol 3.0 (2004-2009)
• Two years full European Warranty.

It is a totally self-developed LCD screen, you can see SA logo on the surface of the product. We independently research and develop this LCD screen. it has fully meet the OE specifications and perfect fit the module. We’ve improved the quality by having the IC chip be protected by black epoxy resin, it's a circuit protection for duration. This LCD screen has the same TAB IC driver as OE. Insert the FPC into the socket on Instrument cluster. Installation is quite easy especially when we’ve enlarged the FPC 3 mm longer. You can always find out a perfect fit LCD replacement in Sacer for your own car or your repair shop, at the most affordable price.

Founded in 2007, Sacer Ltd is a major enterprise specialized in automotive electronics parts integrating independent R&D, manufacture and distribution in aftermarket. With over 10 years auto electronic experience, there is no other better choice than Sacer when it comes to having your Peugeot, BMW, or Audi etc instrument cluster parts replaced! When you compare what we are offering vs. those other suppliers, it's easy to see who has the best value for your dollar! Visit us and find out what you need at our online shop, https://www.sacer-shop.com

More Info About Sacer, Please visit:
https://plus.google.com/+Sacer-shop
https://twitter.com/SacerLtd
https://www.facebook.com/Sacer.de
https://vk.com/sacerltd

SA1049 Stepper Motor For Mercedes S-class Switec

The most common instrument cluster problem seen on the Mercedes S-class Switec is faulty analog gauges. This is usually the first gauge problem the vehicle owner sees and is experienced as a stuck, sticky or jumpy gauge needle.  Occasionally the needle will reset itself temporarily after the ignition switch has been turned on and off a few times but soon returns to its erratic behavior.
Individual gauge problems are almost universally caused by failing gauge motors.

Each gauge is controlled by one gauge motor called a stepper motor.  For example, an instrument cluster with 6 analog gauges will have 6 stepper motors.
SACER has been providing auto aftermarket with high quality gauges since 2007, and has been an industry leader in auto electronic control modules for over 10 years. SACER has satisfied customers all over the world and helped our customers save hundreds of dollars over the repair cost.

SA1049 Stepper Motor
For Mercedes S-class Switec instrument cluster or dashboard. It will work to repair problems such as: sticky needle movement, jumpy readings, dead gauges,  gauges that ratchet up or down, gauges pegged out to the left or right of the dial and more.  This stepper motor has metal shaft, soldering is needed when install.
I highly recommend this stepper motor for its maximum reliability and safe, quiet operation. It works in high efficiency and high position accuracy and has a robust gear system. Every unit is 100% brand new product and tested prior to leaving the factory.

SACER Ltd is a professional manufacturer specialized in auto electronic control parts in aftermarket. It covers a larger range of products including LCD screens, stepper motors, and some other parts for instrument cluster, turbo parts, window regulators, throttle parts and so on. SACER has always committed itself to become a reliable business partner with our customers with our professional knowledge and industry experience, as well as the excellent customer service. Please visit our site and purchase now at:   https://www.sacer-shop.com

More Info About Sacer, Please visit:
https://plus.google.com/+Sacer-shop
https://twitter.com/SacerLtd
https://www.facebook.com/Sacer.de
https://vk.com/sacerltd

New at Sacer | Self-developed LCD with FPC for Peugeot 407

New at Sacer | Self-developed LCD with FPC for Peugeot 407 View this email in your browser   Front View Back View   Application View ●  Item Number: SA1004-2 LCD display with FPC ●  Application: Instrument cluster / Dashboard ●  Car Make / Model: Peugeot 407 (2006), Peugeot 407 Petrol 3.0 (2004 - 2009)   ●  Connect Type: Plug-in ●  Glass Dimension: 57.5 x 48.0 x 1.7 mm ●  Storage Temperature: -30°C to 80°C ●  Operation Temperature: -20°C to 70°C Buy now!   1.  Self-developed, equal to OE contrast, perfect brightness and color. 2.  Quality is improved by adding COB circuit protection for the IC chip. 3.  FPC is 3 MM longer than the OE, it’s much easier to be connected.   OE illumined effect view SACER illumined effect view   A deep focus on auto aftermarket, dedicate to improving the OE quality.   Boast a huge advantage in pricing, which greatly lower your repair cost.     Cover a large range of car makes and models, even for models years ago.  SACER offers customers a follow-up two years full European warranty. Email: sales@sacer.com.cn       Tel: +86-755-22200023 Online Shop: www.sacer-shop.com Official Site: www.sacer.com.cn   Copyright © 2017 Sacer, All rights reserved. You are receiving this email because you opted in at our website. Our mailing address is: Sacer 2/F, West Block, Building E, Longjing Industrial Park Bu long Rd. 335, Long gang District Shenzhen, Guangdong  518129 China